Electroluminescent specifications

Specification Click here for Voltage vs. Curent Density, Voltage vs. Power and Typical Aging Luminance chart.	Applied Voltage		AC 50Vrms to AC 220Vrms (For SplitЃ\|Electro: upto350vac)
	Applied Frequency		50 HZ to 3 KHZ
	Operating Temperature (Centigrade)		-20 degree~50degree (normal) / 80degree (max)
	Storage Temperature (Centigrade)		-30 degree ~ 70 degree
	Operating Humidity		0% ~ 90%
	Operating Current (100vrms/400Hz)		1.5~2.5 mA /sq.in
	Capacitance		2-5 nF/sq.in
	Brightness (100vrm/400Hz)		Regular brightness:40cd / m2. Super bright lamp:60cd / m2 - up to 120cd/m2 -
	Thickness		0.2~0.4mm (min 0.19mm for 2nd Generation Foil)
	Bend Radius		Min.0.25"(Normal foil), (2nd Generation Foil is foldable)
	Normal Edge Seal		0.08"(2mm)
	Min. Edge Seal		0.03"(0.76mm)
	Lead Pulling		0.5kg 10sec.
	Lead Bending		90 degree 250gr bending 2 times
	Soldering Heat Resistance		250 degree 3sec>3mm distance from EL panel with extra force applied
	Life span up to 10,000 hours or more depending on the environment, installation, inverter/driver used, and duty cycle.
Environmental Test	Temperature		Humidity	Test Duration
	-20 degree		0%	upto168hours
	+50 degree		90%	upto168Hours
	+20 degree		60%	upto168Hours
	Operating voltage and frequency - AC 100 Vrms 1 KHZ sine wave
StorageTest	Temperature	Humidity	Duration	Brightness Maintainable
	85 degree		500Hours	75%
	-20 degree		500Hours	75%
	40 degree	90%RH	500Hours	75%
Temperature ShockTest	-20 degree for 30min <-> 70 degree for 30min for a total of 15 cycles, with a maintainable brightness of 85%.
Ѓ@

Every EL product is tested to ensure electrical continuity/durability and the absence of cosmetic imperfections.

We offer custom engineering to meet specific design needs.

Optical measurement of brightness is conducted to ensure products conform to customer requirements.

Environmental chambers test the product in extremes of temperature and humidity.